> > Hunter Solar Sync Sensor
Hunter Solar Sync Sensor
Hunter Solar Sync Sensor
Hunter Solar Sync Sensor
Hunter Solar Sync Sensor

Hunter Solar Sync Sensor

$$ Rebate Eligibility
In many water districts, this controller is eligible for a rebate if purchased with a Hunter Pro-C Controller. See more info about rebates on the Rebate Information tab below.


  • What is the Hunter Solar Sync? The Hunter Solar Sync is a weather sensor system that attaches to your existing irrigation controller to turn it into a "smart controller."

    Why the Hunter Solar Sync? If you have a Hunter irrigation controller, specifically a Pro-C, PCC, X-Core, I-Core, or ACC model, this is the only "upgrade" you can purchase to make your controller smarter.

    We carry the Solar Sync with the following options
    • Wired or Wireless

    Solar Sync Info

    Solar Sync is the primary way to utilize on-site weather data in your irrigation system, if you own a Hunter irrigation controller. It has a few components: the sensor itself which you mount to your roof in a location where it can receive full sun and rain; the module which connects to your controller and translates weather data into irrigation commands; if you buy the wireless kit (recommended) you'll also get a data receiver, already paired with your Solar Sync sensor.

    NOTE: You can purchase the Solar Sync sensor without the module if you have an X-Core, I-Core, or ACC Controller. We can special order the unit for you without the module.


    Important Specifications
    • Maximum distance sensor to module: 800 ft. (wireless model)
    • Maximum distance sensor to module: 200 ft. (wired model)
    • 40 ft. of wire included in kit (wired model)

    Warranty Information
    Hunter warrants the Solar Sync to be free of defects in materials or workmanship under normal use for a period of five (5) years from the original date of manufacture. The battery is warranted for a period of ten (10) years in the wireless model.

    Downloads & Resources from Hunter
  • Solar Sync is just one of the optional sensors to enhance the performance of your Hunter controller. Here are more:
    • Rain-Clik: automatically shuts off (and restores) any sprinklers that are running at first drops of rain or if the temperature dips below 37-degrees F (in stock)
    • Mini-Clik automatically shuts off (and restores) any sprinklers that are running at when a specified amount of rainfall is collected (special order)
    • Wind-Clik: automatically shuts off (and restores) any sprinklers that are running based on specified wind conditions (special order)
    • Freeze-Clik: automatically shuts off (and restores) any sprinklers that are running if the temperature dips below 37-degrees F (special order)
    • ET System: detects Solar conditions, humidity, temperature, and Evapotranspiration (ETo) in one unit for exact micro-climate adjustments, Wind-Clik is optional (special order)
    • Mini Weather Station: incorporates Mini-Clik and Wind-Clik into one unit, Freeze-Clik is optional (special order)

    Sensor Comparison Chart

    Solar Sync Mini-Weather Station ET System
    QUICK SPECS
    Sensor Type ET, Rain, Freeze Wind, Freeze, Rain ET, Rain, Solar, Temp, Humidity, Wind
    Available Wireless Yes No No
    Compatible Controllers ACC, I-Core, Pro-C, PCC, X-Core ACC, I-Core, Pro-C, PCC, X-Core Pro-C, PCC
    Warranty 5 Years (wired model); 10 Years (wireless model) 5 Years 2 Years
    APPLICATION
    Rain Sensor
    Freeze Sensor
    Wind Sensor
    (optional)

  • Rebates typically require the purchase of a smart controller, but sometimes they allow you to upgrade your existing controller and still qualify for the rebate. Rebates range from $25 to $200, and in some areas, like Palm Springs, the water district will give you a free one, and install it and program it for free, too.

    Here are some examples of available rebates

    Install a WaterSense-labeled smart irrigation controller. Purchase a new “smart” controller and never forget to reduce your watering schedule again! The EPA estimates these controllers—which take their cues from real-time weather conditions—can save the average family 8,800 gallons annually. Schedule a pre-inspection with one of our conservation specialists, then take advantage of MMWD’s rebate for $20 per active station. (Marin Municipal Water District)

    Rebate--$200 (for 500-1999 Square Feet) or $400 (over 2000 Square Feet). Minimum conversion of 500 SF. Must replace existing irrigation controller. Controller must be programmed. Controller must be on the SWAT list of tested devices. Original receipts or invoices showing cost of materials must be submitted. Total rebate amount will not exceed the cost of components. (San Diego Public Utilities)

    Find Your Local Rebates
    There are too many water districts and municipalities to list all of the available rebates, so the best thing you can do is search for either your water district or your city and the phrase "smart controller rebate" to find out if you have this opportunity.