We also sell Techline EZ Blank Supply Tubing and Techline EZ Fittings to help you complete your project.

• Product Description
• Features & Benefits
• Installation Tips

• What is Netafim Techline EZ? A high-tech dripline tubing with emitters, and check-valves, built right in.

  Why Techline EZ? We recommend Techline EZ because of the advanced features and uniformity of water application. What sets it apart from other professional-quality dripline is being made from Post Consumer Recycled Material.

  We stock Techline EZ with the following options

  • Flow Rate: 0.4 GPH, 0.6 GPH, and 0.9 GPH
  • Emitter Spacing: 6", 12", and 18"
  • Coil Length: of 200' or 300', 500', and 1000'

  Too many options?
  Choose Flow Rate - 0.9 GPH, Emitter Spacing - 12", and Coil Length - 250'. You can fiddle with it later.

  The pressure range for all Techline EZ models is 6 to 58 psi. To maximize the efficiency of the system, we recommend also purchasing a Netafim pressure-regulating filter for each valve you'll be installing with drip irrigation.

  Netafim Limited Warranty for Driplines
  Netafim warrants any polyethylene tubing and driplines sold to be free from environmental stress cracking for a period of seven (7) years from the date of original delivery.

  Downloads & Resources from Netafim

  • Netafim Techline EZ Product Brochure
  • Quick Install Guide
• The feature-rich Techline EZ product line offers these benefits:
  • Cost-effective in smaller planting areas because it is 24% smaller in size, the materials cost less for the same amount of water delivery power
  • Self-contained, one-piece dripline construction ensuring easy installation
  • Qualifies for use in LEED projects because it is made from post-consumer recycled materials
  • Pressure compensating emitters ensure even distribution of water or a broad pressure range
  • 2 psi check-valve in each emitter so all emitters turn on and off at the same time
  • Patented root-intrusion prevention is physically built into each emitter so no chemicals are needed to prevent roots from damaging your drip line
  On-Surface Usage Ideas for Techline EZ
  
  • Great for shrubs, trees, and flowers. Do not install on top of turf grass
  • Efficiently waters slopes and long runs of tubing
  • Also suitable for green walls and green roofs
  • Great for curved, narrow, and angular planting areas as well as veggie planters
  Sub-Surface Usage Ideas for Techline EZ
  
  • Great for shrubs, trees, flowers, and turf grass not subject to dogs
  • Efficiently waters slopes, curved areas, and narrow planting areas
  • Great for high-traffic areas and raised planters
• You can choose to install Techline EZ below the soil surface, or on top of it, including below mulch.
  
  On-Surface Installation Tips for Techline EZ
  
  • Lay the tubing on top of the soil surface right where you want it. Take care to see that emitters are facing down, and spaced so that an even application of water reaches all of your plants.
  • Staple the tubing down every 2' or so to prevent trip hazards.
  Sub-Surface Installation Tips for Techline EZ
  
  • Bury the tubing around 4" deep so it gets water directly to the root zone.
  • Staple the tubing down every 3' or so.
  All Installations
  
  • You can either lay the tubing out in a grid, or in long lines if your plants aren't spaced closely together. Please see the Netafim Techline CV Design Guide (PDF) for more information on this.
  • Attach Techline EZ to the PVC pipe delivering water from the valve using a male adapter
  • If you're installing Techline EZ for trees, you can create rings around the trees at various distances from the trunk. Remember that the feeder roots are near the tree's dripline (edge of leafy areas) and that trees grow, so you may need to adjust this part of your irrigation system over time.
  • If your plants are spaced further apart than 18" (which is usually the case for native plants), we recommend using blank supply tubing with manually-installed point source emitters instead.